How to use:
1 PREPARE
Important: be sure to conduct the strand test to determine the right amount of time for you.
If you will be using the cap, prepare this mixture after pulling your hair through the cap.
Put on gloves
Pour powder into the tray. Beware not to spill it.
Pour developer into the tray. Mix carefully with brush until it becomes a smooth mixture.
2 APPLICATION
A. Full Highlights or B. Babylights
1. Brush / Comb
Brush / comb your hair as it is normally parted.
2. Tie the cap
Put the cap tight on your head and tie the string under your chin.
Choose your style of highlights and pull your hair completely through the chosen holes.
3. Use the cap
To pull hair through the holes, place the plactic hook flat against the cap, slip the hook through a hole, then gently pull the hook straight out.
Prepare the highlighting mixture.
TIP: holding the cap taut with your fingers will make it easier to pull the hook out.
4. Apply and Wait!
Generously apply the mixture to the hair on your cap.
Leave the product on your hair for the time you had determined from the strand test. Do not exceed 50 minutes.
C. Ombre
1. Ponytails
Tie your hair into two ponutails, making sure that they start at or below your ears.
2. V Shape
With the brush, apply the highlighting mixture in a V shape to the front and back of your ponytail. Stay at least 2cm below the hair band.
3. Cover ends
For the ends, where you want the most intense lightening, saturate completely and massage the product in.
4. Wait! Relax
Leave the product on your hair for the amount of time determined from the strand test. Do not exceed 50 minutes.
D. All over blonde
1. Four sections
Split your hair into four sections, two in the front and two in the back.
Split each section into three more sections, top middle and bottom.
2. Saturate
Staying at least 3cm from the scalp, start applying to the top section until completely saturated.
Repeat for middle and bottom sections, staying at least 3cm from the scalp.
3. Cover & wait!
Once saturated with product, combine the three layers and smooth the product throughout. Leave down.
Repeat this for all four sections of your hair.
Wait 20-30 minutes.
4. Wait! Relax
After waiting, apply the product to your roots. Section the hair to reach all roots.
Wait for 20 minutes.
3 FINALIZE
A/B
Keep gloves and cap on.
Rinse your hair with warm water.
Shampoo your hair.
Apply Advanced Intense Gloss Treatment. Leave on for 2 minutes and rinse.
Remove your cap.
Dry and style as usual.
TIP: Using the treatment may make it easier to remove the cap.
After 30 days, apply the 2nd sachet of Advanced Intense Gloss Treatment for 2 minutes and rinse.
C/D
Keep gloves on.
Rinse your hair well with warm water.
Shampoo your hair.
Apply the Advanced Intense Gloss Treatment. Leave on for 2 minutes and rinse.
Dry and style as usual.
TIP: Do not color or tone your hair until at least 7 days after bleaching.
After 30 days, apply the 2nd sachet of Advanced Intense Gloss Treatment for 2 minutes and rinse.
Ingredients:
HIGHLIGHTING POWDER: POTASSIUM PERSULFATE, SODIUM SILICATE, MAGNESIUM CARBONATE HYDROXIDE, PARAFFINUM LIQUIDUM / MINERAL OIL / HUILE MINERALE, AMMONIUM PERSULFATE, SODIUM STEARATE, XANTHAN GUM, ORYZA SATIVA STARCH, ALGIN, DISODIUM EDTA, SILICA, CI 77007, AQUA / WATER / EAU
DEVELOPER: AQUA / WATER / EAU, HYDROGEN PEROXIDE, CETEARYL ALCOHOL, SODIUM LAURYL SULFATE, SALICYLIC ACID, DISODIUM PHOSPHATE, PHOSPHORIC ACID, SIMETHICONE, ETIDRONIC ACID, SORBITAN STEARATE, PEG-40 STEARATE, POTASSIUM SORBATE, CELLULOSE GUM
ADVANCED INTENSE GLOSS TREATMENT: AQUA / WATER / EAU, BIS-HYDROXY / METHOXY AMODIMETHICONE, STEARYL ALCOHOL, CETYL ALCOHOL, STEARAMIDOPROPYL DIMETHYLAMINE, GLUTAMIC ACID, PARFUM / FRAGRANCE, BENZYL ALCOHOL, CITRIC ACID, BENZYL BENZOATE, EDTA, L-HISTIDINE, COCOS NUCIFERA (COCONUT) OIL, SODIUM CHLORIDE, HEXYL CINNAMAL, LINALOOL, MAGNESIUM NITRATE, ALOE BARBADENSIS LEAF JUICE, TRIMETHYLSILOXYSILICATE, METHYLCHLOROISOTHIAZOLINONE, MAGNESIUM CHLORIDE, METHYLISOTHIAZOLINONE
